· Make sure your Powapass is turned ON
· Ensure Powapass is not wet (For optimum performance all balls should be free of moisture)
· Set your speed using the dials
· If using auto drop, select the timing
· Adjust the machine to the desired angle, then lock the locking levers at the side of the machine
· Lower the balls into the chute - DO NOT DROP them
· Always release an initial ball to test distance and speed
· If using the swivel base, adjust the angle to the preferred position · Ensure ONLY Trainees and the Operator are in the immediate vicinity of the machine.
· Give verbal notice that the machine is about to be activated
· Press F for single ball release or if using Auto drop press R to release all balls at set intervals, REMEMBER if Auto is set to M for Manual the operator needs to press F at desired times to release a ball, then once all balls have been released the operator Must press S to stop the machine.
Learn more: Powapass-Instruction-Manual